How to Use a Ryobi Cordless Drill
To use a Ryobi cordless drill, charge and click in the 18V battery, fit a bit in the keyless chuck, set the clutch and speed for the job, then squeeze the trigger to drill or drive. Let the tool do the work, keep the bit straight, and release the trigger before you set it down.
On this page (8 sections)
- What are the main controls on a Ryobi cordless drill?
- How do you fit and charge the Ryobi 18V battery?
- How do you load a bit in the chuck?
- How do you set the clutch and torque?
- How do you drill a hole with a Ryobi drill?
- How do you handle materials and drill settings?
- How do you use a Ryobi drill safely?
- Which Ryobi drill should you start with?
Here's how to use a Ryobi cordless drill: charge and click in the 18V battery, fit a bit in the keyless chuck, set the clutch and speed for the task, then squeeze the trigger to drill or drive. Keep the bit straight and let the tool do the work.
A Ryobi drill/driver is a simple machine once you know the parts. Battery, chuck, clutch, speed switch and trigger are the controls you'll touch, and each one changes how the tool behaves.
The kits in this guide also ship with a charger and a carry bag, so the whole routine fits in one box.
What are the main controls on a Ryobi cordless drill?
The controls are the battery slot, keyless chuck, torque clutch, speed selector and trigger, plus a forward/reverse switch and a work light. Learn what each does before your first hole.
The battery slides onto the base and clicks into place. The keyless chuck at the front holds the bit.
The numbered collar near the chuck is the clutch. The switch on top changes gear, and the trigger controls speed.
A small forward/reverse slider sits above the trigger. An LED light near the chuck comes on with the trigger to brighten the work area.
Several of these drills also keep spare bits in on-board storage near the base, so a fresh bit is always within reach. The 18V drill set adds a bit set to the kit, which means the controls and the bits arrive together.
How do you fit and charge the Ryobi 18V battery?
Slide the battery onto the tool until it clicks, and charge it on the supplied charger when it runs down. A 1.5 Ah pack in these kits holds enough for everyday drilling and driving around the house.
Line up the battery's tabs with the slots on the drill base and push until you hear the click. A release button lets you pull it free.
Ryobi 18V ONE+ batteries fit more than 250 different tools on the same platform, so one pack covers a growing set. The batteries are lithium-ion and deliver fade-free power, which means the drill keeps its pace as the pack drains instead of slowing down.
To charge, slide the pack onto the charger and plug it in. The charger light shows charging and full.
Take the battery off the drill when you're done so it doesn't drain slowly in storage. The HP brushless kit's battery also has an on-board LED fuel gauge, so you can check the charge level with a press before you start a job.
How do you load a bit in the chuck?
Open the jaws, push the bit in fully, and tighten the chuck firmly so the bit can't slip. A loose bit wobbles, chews the hole and can come free under load.
- Hold the chuck and turn the front sleeve to open the jaws.
- Push the bit in as far as it will go, centered between the jaws.
- Remove the battery or lock the trigger, then tighten the chuck by hand only.
Pull the bit to check it's gripped. If you need more detail on the chuck itself, our guide to how to change a drill bit walks through the same steps for a fresh bit.
The single sleeve ratcheting chuck on the HP brushless kit grips the bit as you turn the sleeve, so the final hand twist seats it cleanly.
What size bit fits a Ryobi drill?
These Ryobi kits take bits up to the chuck size. The 18V drill set and the ONE+ drill/driver kit have a 10 mm chuck, and the HP brushless kit has a 1/2 in chuck.
Round shank and hex shank bits both fit when the jaws close on them. The HP kit's 1/2 in chuck takes larger bits than the 10 mm chucks, which makes it the better pick if you plan to drill bigger holes.
How do you set the clutch and torque?
The clutch collar has numbered settings, and each number changes how hard the drill turns before it slips. Use low numbers for screws and lock the clutch for drilling.
The 18V drill set and the HP brushless kit both carry a 24-position clutch, which gives you plenty of steps between gentle and firm.
What do the clutch numbers mean?
Higher numbers drive screws harder; lower numbers stop the clutch sooner so you don't strip the screw head or split the wood. Start low on soft wood and raise the number until the screw seats without slipping.
On the HP brushless kit, the clutch gives you up to 400 in-lb of torque to work with, so even the middle numbers drive screws firmly.
For drilling holes, twist the collar past the last number to the drill-bit symbol. That locks the clutch so full torque reaches the bit.
The 18V drill set's 24-position clutch gives fine control for driving screws into different materials.
When should you change speed?
Use the low gear for screws and larger holes, and the high gear for small bits and fast drilling. The 18V drill set runs up to 1,800 rpm and the HP brushless kit has a 2-speed motor at 0-450 and 0-1,700 RPM.
High speed suits small holes in wood and drywall; low speed gives more turning force for screws. The ONE+ drill/driver kit turns at up to 600 rpm, so it leans toward driving and light drilling rather than fast hole cutting.
How do you drill a hole with a Ryobi drill?
Mark the spot, fit the right bit, set the clutch to drill mode and squeeze the trigger steadily. Let the bit cut at its own pace instead of forcing it.
Hold the drill with your hand wrapped around the grip and your index finger on the trigger. Start slow to set the bit in the mark, then squeeze to full speed.
Keep the drill square to the surface so the hole stays straight.
Ease off as the bit breaks through so it doesn't snag. For tougher materials, see our guides on how to drill into brick and how to drill through metal for the right bit and speed.

An 18V drill, 1.5 Ah battery, charger, bit set and bag in one kit for holes and screws around the house.
See it on AmazonHow do you drive screws with a Ryobi drill?
Fit a screwdriver bit and set the clutch to a low number. Press the bit into the screw head and squeeze the trigger slowly.
When the screw seats, the clutch slips so the head doesn't strip. Switch to reverse if the screw binds and needs backing out.
The ONE+ drill/driver kit is built for this kind of work, with a compact, lightweight body that reduces fatigue when you drive a run of screws for furniture assembly or a weekend project.
How do you handle materials and drill settings?
Match the bit and speed to the material: sharp wood bits at high speed, masonry bits on low speed for brick and concrete, and metal bits at low speed with light pressure. The wrong bit is the most common reason a hole goes badly.
For wood, a brad-point or twist bit cuts cleanly at high speed. For drywall, a sharp bit and moderate speed stop the paper tearing.
For masonry, a carbide-tipped bit on low speed lets the drill work steadily. The bit set that comes with the 18V drill set covers wood, metal, plastic and even brick, so you can try several materials without buying bits first.
The Ryobi 18V drill set has a drilling capacity of 0.5 inches in metal and wood. That's fine for pilot holes, shelf brackets and cabinet work.
The HP brushless kit also has a 0.5 inch drilling capacity in metal and wood and reaches 400 in-lb of torque for tougher materials. The ONE+ drill/driver kit lists 750 in-lb of torque for driving screws and light drilling.
How do you use a Ryobi drill safely?
Keep hands clear of the bit, wear eye protection, and never change a bit with the trigger live. Treat a cordless drill with the same care as any power tool.
Our guide to how to use a cordless drill safely covers the full routine.
Keep the work secure so it doesn't spin. Hold the drill with both hands when drilling hard materials, and keep your face back from the bit line.
Set the forward/reverse switch to the locked center position when changing bits.
Store the drill with the battery removed and the bit out of the chuck. The included bag in these kits keeps the tool, charger and bits together.
The Buho bag in the 18V drill set has a clear front so you can see what's inside without opening it, which helps when you're packing up after a job.
Which Ryobi drill should you start with?
Pick the kit that matches how much drilling you do: the HP brushless kit for more power and longer runtime, the 18V drill set for a ready-to-go starter kit, or the ONE+ kit for light home repairs.

A 6.4 in brushless drill with 400 in-lb of torque and a 24-position clutch for tougher drilling and driving.
See it on Amazon
A compact 18V drill, 1.5 Ah battery, charger and carry bag for quick repairs and furniture assembly.
See it on AmazonThe 18V drill set bundles a bit set with the drill, battery and charger, so it covers wood, metal, plastic and brick in one box. The ONE+ drill/driver kit is the lighter, compact choice for everyday tasks.
The HP brushless kit has longer motor life and more power than the brushed 18V set, and at 6.4 in long it's 30 percent more compact and 20 percent lighter than the brushed model, so it fits into tighter spaces and overhead work more easily.
Start with the lowest-cost kit if you mostly drill pilot holes and drive screws. Move up to the brushless kit if you'll drill hard materials or want the battery to last longer between charges.
For the clutch and bit routine, this is how to use a Ryobi cordless drill: charge the pack, fit the bit, set the clutch, and let the tool cut at its own pace.
Frequently asked questions
What do the clutch numbers on a Ryobi drill mean?
Higher clutch numbers let the drill drive screws harder before the clutch slips, and lower numbers stop it sooner to protect the screw head. For drilling, twist the collar past the numbers to the drill-bit symbol so the clutch is locked out and full torque reaches the bit.
Can a Ryobi drill drive screws as well as drill holes?
Yes. Fit a screwdriver bit in the chuck and set the clutch to a low number so the bit slips once the screw is seated.
Most Ryobi 18V drill/drivers have a 3/8 in or 1/2 in chuck, so they handle both drill bits and standard screwdriver bits.
How do you lock a drill bit in the chuck?
Open the chuck jaws, push the bit in as far as it goes, and tighten the chuck by hand only, with the battery removed or the trigger locked. Give the chuck a final twist by hand so the jaws grip evenly.
Pull the bit to check it can't slip out before you start drilling.
About this guide: Our look at using a Ryobi cordless drill draws on maker specs, materials and what owners report. See how we research.



